Does any one know where the location of the electric 4x4 shift controll module is on a '89 Bronco II ? I've looked everywhere can't seem to locate it!

 

On my 89, it is on the drivers side behind the drivers seat. There is a small pull out panel on the side that hides the module. On a 88 Ranger I bought for parts, it was under the dash behind the radio. Hope this helps.

 

Same here on my ld 89' Bronco 2 it was behind the drivers seat in the panel... if your lookin for the reset button it glows red well mine did but when pushed it didnt do a damn thing.....


Later

2000 F150 Extended Cab 4x4 Sport Black
previous bronco 2 owner

 

[font size="1" color="#FF0000"]LAST EDITED ON 17-Oct-01 AT 09:45 PM (EST)[/font][p]I have an 88, the module is located under the panel on top of the dash, just right of center. I lost the push button 4 wheel and low range functions. I got some advice on testing and the red light, but was unable to get the module to test. I swapped modules with the same results. If you are experiencing similar problems and find the solution, I would definitely be interested. Just as a thought, I was advised the electric motor that activates the mechanics for these functions often goes bad.