Will transfer case fit
Thread Starter
|
New User
Joined: Sep 2004
Posts: 14
Likes: 0
Will transfer case fit
I have a 79 F150 4x4. It has a 351m with a manual tranny. I friend has a c-6 out of a 77 F150 4x4 with a 400m. Will that c-6 bolt up? Will my transfer case fit, or do I need to find one that was bolted to an auto to begin with?
Thanks,
Sam
Thanks,
Sam
Post Fiend
Joined: Jul 2003
Posts: 11,945
Likes: 3
From: Spokane, WA
All you need is the adapter that goes from the tranny to t-case. This will be different for the C6 than it was for your 4 speed. These can be found at junkyards or on ebay from time to time and they'll be pretty cheap ($10-$50 all depending on who it comes from). The transmission will fit your engine fine. They're the same block, just with different stroke lengths.
Thread Starter
|
New User
Joined: Sep 2004
Posts: 14
Likes: 0
What "adapter pate" is that? I removed a c-6 from a 77 f150 and I don't remember seeing anything between the tranny and the transfercase. The case just bolted to the back side of the tranny. Now I am confused. Maybe I am getting old and my memory is going.
Logistics Pro
Joined: Aug 2003
Posts: 4,701
Likes: 6
Here is a picture of a 4 speed adapter plate to give you an idea of what they look like.
https://www.ford-trucks.com/user_gal...=50225&width=2
https://www.ford-trucks.com/user_gal...=50225&width=2
