5.8 exaust problem
Thread Starter
|
New User
Joined: Sep 2004
Posts: 1
Likes: 0
5.8 exaust problem
i have a 95 f 150 5.8L and i holowed out my cad in the rear closest to back of truck their are 2 on it and in between them their is a metal tube and i broke it so i welded it on and ever sence then when the truck is warming up it idles really low and almost stalls and 2 min. later its seems to be fine. my check eng.. lite is on once and a wile. i got a o2 simulatore from casper electronics and did nothing. also sometimes it idles funny whil driving it feels really sluggish.
pleas help.....
ps. i dont whant a new cad becaus i was planing on taking aff both and runing duels with magnaflow or somthing but i want to get it runing corectly first.
pleas help.....
ps. i dont whant a new cad becaus i was planing on taking aff both and runing duels with magnaflow or somthing but i want to get it runing corectly first.
