260 picture needed
Thread Starter
|
Lead Driver
Joined: Oct 1999
Posts: 6,782
Likes: 558
From: Kalispell, MT
260 picture needed
Hi guys/gals,
I'm trying to visually id an engine a friend picked up. Ford V8 with really short valve covers. Oil breather up front but otherwise it looks like a 289 including a 5 bolt bellhousing. If memory serves me right casting numbers indicated '63?
Do any of you have a picture of a 260 that might help? Or any ideas what I should look for.
Thanks! - Tim
I'm trying to visually id an engine a friend picked up. Ford V8 with really short valve covers. Oil breather up front but otherwise it looks like a 289 including a 5 bolt bellhousing. If memory serves me right casting numbers indicated '63?
Do any of you have a picture of a 260 that might help? Or any ideas what I should look for.
Thanks! - Tim
Senior User
Joined: Jul 2004
Posts: 139
Likes: 0
From: Front Range of Colorado
Bouncing around the web I think I have seen a set of the 221-260-289 sequence, probably a Ford publicity photo that was copied, but have no idea where.
Pam
I did a 221-260 swap in my 1962 Fairlane in summer 1969. The only real exterior difference was the exhaust manifolds.
Pam
I did a 221-260 swap in my 1962 Fairlane in summer 1969. The only real exterior difference was the exhaust manifolds.
Last edited by Pam's Red; Sep 14, 2004 at 02:01 AM. Reason: correction
Thread
Thread Starter
Forum
Replies
Last Post
260falcon
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
11
Dec 16, 2005 02:27 PM
