Part Number For Multifunction Switch Hardshell Connector
Thread Starter
|
Logistics Pro
Joined: Jul 2003
Posts: 3,595
Likes: 52
From: Lawton, Oklahoma
Part Number For Multifunction Switch Hardshell Connector
For those of you who have the broken multifunction switch hardshell for the large connector here is the Ford part number..
E6DZ-14489-M
This is just for the hardshell and no wires. With this you dont need to splice in a bunch of wires, just remove the pins from the old connector and snap them into the respective slots of the new connector. It is a common problem on late model F150/Expedition (Heritage body style) with tilt steering. Common symptom is the turn signals work with wheel tilted up but wont work with wheel tilted down.
Shouldnt be more than 10.00.
E6DZ-14489-M
This is just for the hardshell and no wires. With this you dont need to splice in a bunch of wires, just remove the pins from the old connector and snap them into the respective slots of the new connector. It is a common problem on late model F150/Expedition (Heritage body style) with tilt steering. Common symptom is the turn signals work with wheel tilted up but wont work with wheel tilted down.
Shouldnt be more than 10.00.
Thread Starter
|
Logistics Pro
Joined: Jul 2003
Posts: 3,595
Likes: 52
From: Lawton, Oklahoma
All white wires.... same crap we have 
Until this hardshell was avaliable I plucked all those white wires out and used the factory wiring except where there was a burn or melt down.
Until this hardshell was avaliable I plucked all those white wires out and used the factory wiring except where there was a burn or melt down.
Thread
Thread Starter
Forum
Replies
Last Post
shargue
Electrical Systems/Wiring
8
Aug 13, 2017 07:38 PM
strokin'_tatsch
1994.5 - 1997 7.3L Power Stroke Diesel
20
Feb 28, 2017 06:55 AM
Rockledge
1983 - 2012 Ranger & B-Series
17
Oct 30, 2015 08:19 AM
oldtech
Explorer, Sport Trac, Mountaineer & Aviator
21
Sep 9, 2015 06:40 AM
