Need a used manifold!

Reply Subscribe

Thread Tools

Search this Thread

Sep 9, 2004 | 11:17 AM

neversosure

Thread Starter

Senior User

Joined: Mar 2003

Posts: 259

Likes: 2

From: SOUTHERN NEW JERSEY

Need a used manifold!

Hello fellow South Jersians!!!

I need a 351w non egr aluminum intake, 4bbl. Edelbrock,holley, etc..

If anyone has one to sell or trade drop me a line at MJKATSORIS@MSNCOM

Thanx

Oct 25, 2004 | 04:52 PM

surfrider

New User

Joined: May 2004

Posts: 7

Likes: 0

i put a 351 manifold on my 302, so i can only assume a 302 manifold would work on a 351. then again, just cause it bolts up, doesn't mean its right.

Oct 25, 2004 | 10:01 PM

psdpower

Elder User

Joined: May 2004

Posts: 637

Likes: 0

From: Forest Hill, MD

If you haven't found one yet I think I have one, send me a pm.

Oct 26, 2004 | 10:01 PM

jeepkiller

New User

Joined: Oct 2004

Posts: 21

Likes: 0

302 and 351w are NOT interchanglable I believe the 351c and the 302 were.
351w is a much wider motor. thats where the "W" comes from

Oct 27, 2004 | 12:30 AM

psdpower

Elder User

Joined: May 2004

Posts: 637

Likes: 0

From: Forest Hill, MD

Quote:

Originally Posted by jeepkiller

302 and 351w are NOT interchanglable I believe the 351c and the 302 were.
351w is a much wider motor. thats where the "W" comes from

The "W" actually stands for Windsor, the prodution facility the motors were made in. The 302 is also a "W" or Windsor motor, but since there is only one Ford 302 you don't often hear it referred to as the 302w. No the 302w and 351w intake manifolds are not interchangeable, and yes it is because the 351w is wider, not because the block is any wider but because the deck height of the block is taller thereby making the heads further apart. I believe that adapters used to be made to put the "C" or Cleveland intakes on 351w not sure about putting the "C" intake on a 302 though.

Oct 27, 2004 | 02:22 AM

jeepkiller

New User

Joined: Oct 2004

Posts: 21

Likes: 0

your right,I dont know what the hell I was thinking of ,The windsor is the widest of the 351's.I believe w/ a little grinder work you can get a 302 intake on to a 351c

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump