EGR pipe and wire placement
Thread Starter
|
Posting Guru
Joined: Sep 2003
Posts: 1,276
Likes: 0
From: Auburn/ Opelika
EGR pipe and wire placement
My pals and I put headers on the ol' Bronco and we removed the inner fenders to have better access. They went in ok but I can't get all the wires around the egr pipe to sit right, one of the connectors already has a good melted spot on it. I've already hunted the galleries and no results. The wires come from behind the EGR pipe and look like they go into the inner fender (passenger side) but they don't reach. One has a plastic screw/snap thing like it goes to the fender. I'm stuck. -Bill
Thread Starter
|
Posting Guru
Joined: Sep 2003
Posts: 1,276
Likes: 0
From: Auburn/ Opelika
Oh yeah, the receiver end follows the spark plug cables to the EGR pipe, the input end comes from the bottom of the TB, behind and above the backside of the alternator. It's a 351W 5.8, the 5.0 is different. Anybody? -Bill
