Anyone have an extra USEABLE FE block?
Thread Starter
|
Cargo Master
Joined: Feb 2004
Posts: 2,068
Likes: 168
From: Central Texas
Anyone have an extra USEABLE FE block?
I'm currently running a 352 and already have the crank, rods, pistons, etc. to convert to a 390, but would like to run this motor while the 390 shortblock is prepared. So, I need a block. Does anyone in central Texas have one? I'd prefer to start with a 352 so that I can finish bore it to the stock 4.050" 390 bore, but it is not a big deal if it isn't.
Post Fiend
Joined: Feb 2000
Posts: 5,130
Likes: 8
From: Brea CA
Hi! Have you tried the classifieds?
If you already got the pistons, are they standard size? If so you're gonna have to bore out a 352 because I doubt you'll find a 360/390 with a clean standard bore.
If you already got the pistons, are they standard size? If so you're gonna have to bore out a 352 because I doubt you'll find a 360/390 with a clean standard bore.
