Rear end identification
Senior User
Joined: Mar 2004
Posts: 209
Likes: 0
From: New York
It seems that you're missing a number. It should start with 3._________, you probably have the 3.55 gearing on the 8.8. You can also use the axle code on the driver's side door jamb and call up Ford's service dept. to find out what rear you have.
Warr
Warr
Thread Starter
|
Elder User
Joined: Jul 2003
Posts: 935
Likes: 0
From: TEXAS!!!!!!!!!!!!
Trending Topics
Senior User
Joined: Apr 2004
Posts: 201
Likes: 0
you can use the code identifiers on this website to tell what rear you have. I used it on mine.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Top 10 Ford Trucks Coming to Mecum Indy 2026
Brett Foote
5 Best / 5 Worst Ford Truck Wheels of All Time
Joe Kucinski
Senior User
Joined: Mar 2004
Posts: 209
Likes: 0
From: New York
Drew, the axle code would be different if it was limited slip. I have code H9 which is limited slip. If the rear end was replaced and to find out if it's limited slip jack up the rear and put in neutral, spin the tire and if the other wheel is spinning in the same direction then you have limited slip.
Warr
Warr
Last edited by bronco5.8; Aug 17, 2004 at 07:34 PM.