A/C Clutch
Thread Starter
|
Senior User
Joined: Feb 2003
Posts: 125
Likes: 0
From: BC
A/C Clutch
Should i assume that if my a/c clutch doesn't engage i need a new one? I tested the harness that goes to it and 12v are there when the switch is in the a/c position. Is it hard to replace?
Its a 97 F-250 HD 7.5L
Thanks Guys!!!
Its a 97 F-250 HD 7.5L
Thanks Guys!!!
Post Fiend
Joined: Oct 2003
Posts: 6,214
Likes: 13
From: New Jersey
If you are getting voltage at the connector when the A/C switch is on, and the clutch doesn't engage, its the clutch for sure.
Its not to difficult to take off, its a couple of bolts. I don't believe there are any special tools required, but its been a while.
Its not to difficult to take off, its a couple of bolts. I don't believe there are any special tools required, but its been a while.
