Ghetto Lean....
Thread Starter
|
New User
Joined: Jul 2004
Posts: 1
Likes: 0
Ghetto Lean....
I just purchased an 86 250 4x4 and it has a slight lean to the body. when looking at it from the front or back it is noticible. the bumper is lever as well as the bed and rear bumper. the pass side is the side that is lower and seems to be equal from front to back. i checked the body bushings and all seem to be in good condition. i decided that i would just throw some shims in to level it out, but was curious if anyone had run into this. thanks
