Hole In FIREWALL???!?!?!?
Tuned
Joined: Mar 2004
Posts: 284
Likes: 1
there are plenty grommets on the drivers side firewall that you can run cables or tubing trough. I usually use a 3-4 ft piece of a metal fish or a coat hanger will work also,, Tape your wires or tubing to one end and poke the other end through the grommet and then pull them through, be carefull to to poke any other hoses or cables. hope this helps.,..
Postmaster
Joined: Dec 2003
Posts: 3,359
Likes: 0
From: Dallas
Originally Posted by PSD6litre40
Is there a hole to route my Pyro Wires and Boost Tubes through or do I need to drill one? I sure am missing one if there is one, LOL
Post Fiend
Joined: Oct 2002
Posts: 11,314
Likes: 4
there's already 4 or 5 wires runing thru a grommet that are pig-tailed on either side of the firewall for just this purpose....
check it out !
You don't have to punch anything any more !
(although if you use one of them your warranty will be voided !)
just kidding !
check it out !
You don't have to punch anything any more !
(although if you use one of them your warranty will be voided !)
just kidding !
Last edited by jdadamsjr; Jul 29, 2004 at 02:00 PM.
