1983 - 2012 Ranger & B-Series All Ford Ranger and Mazda B-Series models

Need Help

Reply Subscribe

Search this Thread

Old

Jul 22, 2004 | 09:32 PM

#1

watauga62

Thread Starter

|

New User

Joined: Jul 2004

Posts: 2

Likes: 0

Need Help

I have a question about my 94 Ranger 4.0 automatic. the transmission slips trying to shift into 2nd gear in drive. I read somewhere to check the modulator. I looked for the modulator and was not able to find it. I would like for someone to inform me of where it is or suggest some other problem or solution. Also, the check engine light comes on for several seconds while going up a certain hill. Any suggestions? thanks.

Last edited by watauga62; Jul 22, 2004 at 09:38 PM.

Reply

Old

Jul 22, 2004 | 09:42 PM

#2

nightshifter

Senior User

Joined: Jun 2004

Posts: 108

Likes: 0

first place I would check is on the passenger side of the tranny. That's where mine was on my 94 aero.

Reply

Old

Jul 22, 2004 | 09:44 PM

#3

watauga62

Thread Starter

|

New User

Joined: Jul 2004

Posts: 2

Likes: 0

I looked there but I am not quite sure what it looks like.

Reply

Old

Jul 22, 2004 | 09:54 PM

#4

nightshifter

Senior User

Joined: Jun 2004

Posts: 108

Likes: 0

looks like a vacuum actuator, should be a short vacuum hose running to it.

Reply

Old

Jul 23, 2004 | 07:06 PM

#5

hreed

Posting Guru

Joined: Nov 2003

Posts: 1,221

Likes: 0

From: Homer, Alaska

Could also be a vacuum leak. Put a guage on the engine to see how it looks. Try pulling the codes to see if there is anything there.

Reply

Reply Subscribe

Thread Tools

Search this Thread

Show Printable Version

Show Printable Version

Email this Page

Email this Page

Reply Share

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 08:51 PM.