Driver seat reclining...problems
Thread Starter
|
Freshman User
Joined: May 2003
Posts: 40
Likes: 0
From: Northern Virginia
Driver seat reclining...problems
I recently noticed that the drivers seat doesnt sit at the same angle that it used to at the most upright position. There is a lot of play in the seat back...i can rock it back and forth...i thought maybe it wasnt bolted down tightly but it is..Has anyone had this problem? Is the reclining mechanism on the side of the seat replaceable? would that have anything to do with it?
Thanks for any input...this is a real pain in the ***
Thanks for any input...this is a real pain in the ***
Senior User
Joined: Mar 2004
Posts: 209
Likes: 0
From: New York
I don't know why it's like that, my seat is the same way and so is my buddy's bronco. I know the passenger seat is more upright than the driver's side. When I get that chance I'm gonna pull the seat apart and see what's up with it.
Warr
Warr
Freshman User
Joined: Jun 2004
Posts: 27
Likes: 0
From: Colorado Springs, CO
i have the same prob, unfortunately. after weeks of tinkering with it, i finally cut the fabric covering the lower part of the seat to check the frame, sure enough, the frame had snapped in half right in front of the reclining mechanism. you might check that at some point if other methods of fixing it, such as tightening the bolts on the reclining mechanism, dont work. hope this helps
Thread Starter
|
Freshman User
Joined: May 2003
Posts: 40
Likes: 0
From: Northern Virginia
Would these seats bolt in without any problems?
http://cgi.ebay.com/ebaymotors/ws/eB...category=33701
http://cgi.ebay.com/ebaymotors/ws/eB...category=33701
