What's moved?
Thread Starter
|
Freshman User
Joined: Jul 2004
Posts: 46
Likes: 0
From: Garland, Tx
What's moved?
On My 95 Lightning's drivers door, the front edge above mid door, has started rubbing the front quarter panel slightly when I open it. The door itself and
hinges are tight and it closes with no problem. This is bugging me...not to
mention paint flaking off the door's edge... any suggestions???
hinges are tight and it closes with no problem. This is bugging me...not to
mention paint flaking off the door's edge... any suggestions???
Thread Starter
|
Freshman User
Joined: Jul 2004
Posts: 46
Likes: 0
From: Garland, Tx
I fixed it: Found it was 2 bolts that had loosened inside the engine compartment, that
attached the top of the fender well to the body. Tightning them up pulled the metal away from the door & no more rubbing when I opened the door. The potholes and
rough roads from all the rain around here give the truck a good shaking at times....
probably the result over time.
attached the top of the fender well to the body. Tightning them up pulled the metal away from the door & no more rubbing when I opened the door. The potholes and
rough roads from all the rain around here give the truck a good shaking at times....
probably the result over time.
Thread
Thread Starter
Forum
Replies
Last Post
lightning guy
Lightning, Harley-Davidson F-150, Roush F-150 & Saleen F-150
3
Oct 6, 2001 10:13 PM
