Wiring help 89'
Thread Starter
|
New User
Joined: Sep 2003
Posts: 9
Likes: 0
Wiring help 89'
i just put new heads on my 89' and I am just about done, but the wiring harness is being a pain. Some of the sensors arn't long enough to hook up. for example the A/C compressor sensor is really short. 
Any fast response will be appreciated. Is the wiring harness suppose to go on the passenger or the driver side of the intake.? need help havn't had my bronco for 3 months so close to having it back and this happens
Any fast response will be appreciated. Is the wiring harness suppose to go on the passenger or the driver side of the intake.? need help havn't had my bronco for 3 months so close to having it back and this happens
Post Fiend
Joined: Dec 2001
Posts: 10,562
Likes: 4
From: South Jersey
I have some photos of my old 1989 Ranger someplace, I'll look for them. The only thing I remember from doing the valve covers 4 years ago is two connection on the passengers side valve cover and the ran through the intake manifold.
