Removing locking hubs
Thread Starter
|
Senior User
Joined: Jun 2004
Posts: 159
Likes: 0
Removing locking hubs
I have a 79 F150 4x4 with the locking hubs, (same as warn standard) I get the cap off, I get the lock ring off, I get the hold down screw out. The outer ring that the screw holds in and spring come out. Then nothing else. What is the next step? I don't see a lock nut or anything else but the rest of the old hub isn't coming out.
Elder User
Joined: Sep 2003
Posts: 785
Likes: 1
From: colorado
it goes around the inside of the hub nothing to do with the spindle. if i was a super computer wiz like some of the guys here i would paste up a pic but by the time i found one you'd already be done. chiltons have a pretty good diagram. maybe a better way to explain it is, it pushes out around the inside of the hub
Last edited by bassdude; Jul 3, 2004 at 09:52 PM.
