No start after rotor install, HELP!
Thread Starter
|
New User
Joined: Feb 2004
Posts: 9
Likes: 0
No start after rotor install, HELP!
I have a '89 F-150 4x4 w/ 300 6 Cyl that I've posted about a couple of times. Truck has been running, but seemed sluggish w/ poor mileage. I replaced spark plugs (wires were about a year or so old). Still no help. Decided to try changing distributor cap & rotor. Pulled cap, changed rotor, re-installed cap, reconnected wires, and now I don't have anything! Turned key, no start, no lights on dash, nothing. Please help.
I've discovered that the distributor cap end of the #2 plug wire looks burned out. Would this cause part of my problem
I've discovered that the distributor cap end of the #2 plug wire looks burned out. Would this cause part of my problem
