Need help with vibration

Reply Subscribe

Thread Tools

Search this Thread

Jun 28, 2004 | 10:32 PM

Blue Tear

Thread Starter

New User

Joined: Jun 2004

Posts: 14

Likes: 0

Need help with vibration

Trying to figuer out Y my Bronco will shake or vibrate at about 50mph to 65mph then go away I know its not the brakes or the tires as it only hapens when im on the gas and when i dont accelerat it goes away.

Any help would be apprecited

Thanks Bob

ArchDemon999@charter.net

Jun 29, 2004 | 07:19 AM

Trouble93

Freshman User

Joined: Jan 2004

Posts: 35

Likes: 0

Rear U-Joint

Mine did the same thing. Rear U-Joint. Looked good, passed the hand check, no rust, corrosion or anything. Switched it out and inspected it and it was ate up inside. Cheap and easy fix.

Jun 29, 2004 | 07:54 AM

jdmorg

Posting Guru

Joined: Jun 2004

Posts: 1,371

Likes: 0

From: just outside of Phila.

same thing for me in my 88 4x4 and I swithed the constant velocity joint, didn't do it anymore. I could feel it in the transfer case shifter too.

Jun 29, 2004 | 09:31 AM

redrumybronco

Senior User

Joined: Jun 2004

Posts: 207

Likes: 0

Is there any noise associated with the vibration? Clunking sounds are often times associated with u-joints and squeeling sounds with wheel bearings. Heavy vibration is often due to the wheel bearings becoming loose.