Driveshaft help
Thread Starter
|
New User
Joined: Jun 2004
Posts: 7
Likes: 0
Driveshaft help
I will start by saying hello, first post. I was hoping someone can give me a little advise on my driveshaft. It doesn,t make any noise but you can feel the clunk on initial accelleration, and when you just come to a stop. I have had it looked at and both times they packed the slip joint full of grease and it goes away for a while. ? is , should i just buy a new driveshaft, or is it fixable? My stearing does the same thing, grease it and it is fine for a while. same thing ,can it be fixed or should i change it out? Thank you in advance for any info.
96 Ford Bronco
302 EFI ,,auto trans.
mostley stock, all but the tires. Love this Truck
96 Ford Bronco
302 EFI ,,auto trans.
mostley stock, all but the tires. Love this Truck
Elder User
Joined: Sep 2003
Posts: 533
Likes: 0
From: Myrtle Point, Or
Sounds like these parts are going out and need replaced. The greese will fix it for a little while because the greese acts like a bearing. Replace Rear U-joints. As for the steering, u need to find out what is losse.
