will someone run this build?
Thread Starter
|
Postmaster
Joined: Jul 2003
Posts: 3,934
Likes: 0
From: iowa
will someone run this build?
351cleveland
3.85 stroke
4.030 bore
393ci
11cr
4v closed heads 2.19 in /1.71 ex
flat top pistons
750 double pumper
cam specs 244/244 at .050 and .560 lift adv duration 292, lsa 110 degrees
single plane intake (edel torkerII)
1 and 7/8 headers, long tubes. No mufflers.
flow figures int
100/ 64
200/ 116
300/ 164
400/ 210
500/ 246
600/ 274
ex figures
100/ 68
200/ 104
300/ 134
400/ 154
500/ 169
600/ 179
3.85 stroke
4.030 bore
393ci
11cr
4v closed heads 2.19 in /1.71 ex
flat top pistons
750 double pumper
cam specs 244/244 at .050 and .560 lift adv duration 292, lsa 110 degrees
single plane intake (edel torkerII)
1 and 7/8 headers, long tubes. No mufflers.
flow figures int
100/ 64
200/ 116
300/ 164
400/ 210
500/ 246
600/ 274
ex figures
100/ 68
200/ 104
300/ 134
400/ 154
500/ 169
600/ 179
Last edited by fordeverpower; Jun 23, 2004 at 02:55 AM.
Thread Starter
|
Postmaster
Joined: Jul 2003
Posts: 3,934
Likes: 0
From: iowa
i know what you had posted and have a answer as to why it was changed. There are certain companies and sites that FTE doesn't promote or allow to be typed on the forums. Had this happen long time ago and that was that answer. As summitracing itsthe bomb. I have ordered from them several times and they are good. I don't believe that they sell dd2000 but jegs does and i havn't orderer it because pro racing sim is better.
