Grease fitting type?
Thread Starter
|
Freshman User
Joined: May 2004
Posts: 43
Likes: 0
I remeber taking in my 96 Explorer to the stealer once for an oil change. I mentioned to them that I hear a grinding sound coming from probably the ball joints whenever I backup from a driveway onto the street or make a sharp turn.
The stealer told me that they lubed the joints as they performed the oil change; he said thry always lube the joints.
Recently I've started hearing the noise again. So I was wondering whether this was a DIY job.
Thanks
The stealer told me that they lubed the joints as they performed the oil change; he said thry always lube the joints.
Recently I've started hearing the noise again. So I was wondering whether this was a DIY job.
Thanks
