One more time around the block
Thread Starter
|
Freshman User
Joined: Nov 2003
Posts: 42
Likes: 0
From: ND
One more time around the block
Looking for anyone who has lifted the rear of their Crew Cab short box F250 using the Ford 4" blocks. A couple quick questions... 1) Anyone have the part numbers (156 inch wheelbase) for the blocks and u bolts and 2) Anyone had trouble with driveshaft vibration after doing this? Thanks.
Freshman User
Joined: Nov 2003
Posts: 41
Likes: 0
From: Chester County, PA
This info was posted earlier in a thread. I believe the info to be correct.
For 4" blocks
137" & 142" WB
F81Z-5598-GA(L) (tapered)
F81Z-5598-FA(R) (tapered)
156", 158", & 172" WB
F81Z-5598-DA(L & R) (non-tapered)
Ford # F81Z-5705-EA - U bolts
I'm sure someone can confirm this info.
Good luck.
For 4" blocks
137" & 142" WB
F81Z-5598-GA(L) (tapered)
F81Z-5598-FA(R) (tapered)
156", 158", & 172" WB
F81Z-5598-DA(L & R) (non-tapered)
Ford # F81Z-5705-EA - U bolts
I'm sure someone can confirm this info.
Good luck.
Thread Starter
|
Freshman User
Joined: Nov 2003
Posts: 42
Likes: 0
From: ND
tberry333
tberry333, Would be interested in your blocks and ubolts. Email me at Kevin.Skavhaug@sendit.nodak.edu I will not have access to the internet until Tuesday. Thanks, Kevin
Thread Starter
|
Freshman User
Joined: Nov 2003
Posts: 42
Likes: 0
From: ND
tberry333, the forum does not allow email addresses. I posted a want ad in the classifieds under superdutys, then link to "body". My email address is included there. Thanks and sorry for taking up one on one conversations in the forum.
