truck won't start
Thread Starter
|
New User
Joined: May 2004
Posts: 22
Likes: 0
truck won't start
hi everyone, i have a '94 f-250 5.8 eng and auto o/d. truck won't start and has no spark. i went to advance auto and picked up a ignition module and tool and figured this would fix it. i read the instrutions and pulled the distributor but can't figure out where this this is supposed to go. according to the diagram it mounts to the boss on the side of the distributor but the old one isn't there. nor does it look like anything was ever monted there. is there another place it's mounted or does this truck have something else that does that job? oh, i also put a new cap and rotor on it but didn't make a difference.
