Maybe Ya'll know...
Thread Starter
|
More Turbo
Joined: Feb 2004
Posts: 739
Likes: 11
From: Westfield, North Carolina
Maybe Ya'll know...
I already asked this in the Supercharging forum, but no answer yet so I figured Id ask the next best or maybe the best place. Were can I get a Paxton/Powerdyne type supercharger for an FE. Ive seen them on the 427 and 428 Shelby's of old and the new kit cars, but I cant seem to find them, any ideas? 
Lead Driver
Joined: Apr 2001
Posts: 6,175
Likes: 21
From: Texas
You probably need to be looking for an intake manifold first. I think the only company that migt be still making an FE supercharger manifold is Blue Thunder. You might start with DSC motorsprts and see what they know.
You might be able to catch a manifold on eBay as well. I know there was one a while back. Expect to spend about a grand or better. I don't even know where to start for the belts and pulleys etc!
You might be able to catch a manifold on eBay as well. I know there was one a while back. Expect to spend about a grand or better. I don't even know where to start for the belts and pulleys etc!
Thread Starter
|
More Turbo
Joined: Feb 2004
Posts: 739
Likes: 11
From: Westfield, North Carolina
I know about BDS but those arent centrifigul superchargers, like the paxtons are. The centrifigul type is pully drivin i beleive but i dont think the require a special manifold. Corrections?
