possible fuel inj solution
Thread Starter
|
Senior User
Joined: Jun 2001
Posts: 213
Likes: 1
From: Austin USA
possible fuel inj solution
Hi all I don't post in this forum, but sure have learned much form it. I have read many post about wanting to FI a 400. I have been looking around as well and have everything on a rough draft, but the throttle body. Then one of my mustang buddies turned me on to this Power Elbow. I was going to make my own but this looks like it will work. It is an elbow that bolts to the TB and them to a carb base. I am pretty famiiar with Ford FI and want to keep it as close to that as possible. I will try it out with in the next 6 months, but if anyone has an ideas please post them. I have not seen this posted before, but if it has I apologize.
http://www.coasthigh.com/fuelinj_pel...2=Power+Elbows
http://www.coasthigh.com/fuelinj_pel...2=Power+Elbows
Junior User
Joined: May 2003
Posts: 91
Likes: 0
That's a neat peice. I found this while looking for a solution as well.
http://www.mez.co.uk/ms2.html
I guess keeping it simple works....
http://www.mez.co.uk/ms2.html
I guess keeping it simple works....
