Ph level in coolant??
Postmaster
Joined: Feb 2002
Posts: 2,773
Likes: 0
From: Bonney Lake, WA
The test strips don't measure pH specifically, at least the ones I get don't. They measure the level of two key ingredients that prevent bubbles in the coolant from sticking to the inside of your engine.
Senior User
Joined: Jun 2003
Posts: 182
Likes: 0
If you have the test strips that give PH and they show to high or low you need to drain and fill with new coolant and add som SCA, like DCA-4 Pencool, or a like. If Nitrate's are to low add more in a powerstroke a littel goes a long way. if to high you should drain and fill. it's a littel hard on the seals. If the SCA level to high.
By the way I keep over 100 Cat powerd Peterbult's Running and I only seen the ph off 1 time.
By the way I keep over 100 Cat powerd Peterbult's Running and I only seen the ph off 1 time.
Thread
Thread Starter
Forum
Replies
Last Post
Scott Fraser
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
5
May 13, 2008 08:21 PM
