DuraSpark teardown?
Thread Starter
|
Posting Guru
Joined: Jul 2003
Posts: 1,268
Likes: 0
From: Eureka, Ca.
DuraSpark teardown?
I am getting a Holley Phasing kit for my DuraSpark dist.
Considering I can't see how the parts are held in the dist. ( (Iam blind) I need some guidance as to the disassembly of the guts.
How does the pickup come out?
How does the relucter come out?
That should get me started.
Considering I can't see how the parts are held in the dist. ( (Iam blind) I need some guidance as to the disassembly of the guts.
How does the pickup come out?
How does the relucter come out?
That should get me started.
Posting Guru
Joined: Jul 2003
Posts: 1,280
Likes: 0
From: alaska
you need to get a gear removal tool for the dist drive gear and after you remove the pin secureing it to the dist shaft ,use it to remove the gear . then pull the shaft out the top of the housing and you should be able to easily remove the other parts. use the same tool to reinstall the gear . that shaft is very brittle and pounding on it usuall y breaks it,bob
