need some serious help
Thread Starter
|
New User
Joined: May 2004
Posts: 21
Likes: 0
need some serious help
ok this will be that last time i bug you guys i asked some ameature questions earlier cause i am? But this is my plan and please tell me if you think i am in the right direction or the wrong. I curentle am running 2 4x6 unamplified and 2 3" with tweeter unamplified along with 2 clarion srw 2 years old dual voice coils 10"ers on a clarion 400.4 amp bridged to a 2 channel one chanel for each sub at 2ohms. i have a clarion class t 1000 watt amp on the way and was wondering the best plan to go, this will be the last time i mess with the truck so i wanna do it right. i want to run the 1000w for the 2 subs alone, on the new pxw clarion 10" subs which i think i will buy (sounds like their loud) then i will use my 400 for 2 new 6x9's. and the 3inch clarions w/ tweeters up front. while the old 4x6's in the back will run off the clarion 53x4 deck. does this sound like it will be awesome?? i want serious answers, what else would you guys do?? also i hope tp port the box for 2 10's which just might be impossible, and also i want the thing to have the loudest clearest bass possible with sweet mid and top, thanks for any sugg.
Senior User
Joined: May 2004
Posts: 234
Likes: 0
From: Chesapeake, VA
Hey there awf-150. Sounds like you're on a good track to a great sounding system. The only problem I see though is your plan to run the 4x6's off the Clarion head. "Most" aftermarket units only allow you to use either the Preamp outs OR the speaker outs, not both at the same time. Clarion may be different, so it's definetely something you'll want to verify before you hook everything up.
Don't worry about the questions, we were all amatuers at one point
Don't worry about the questions, we were all amatuers at one point
