ttm install
Thread Starter
|
Freshman User
Joined: Jul 2003
Posts: 34
Likes: 0
ttm install
I wired my TTM Initially I used a 10 awg red wire with black trace under the dash but this would not allow the truck to continue to run until the truck was cool. I know that this is an ignition wire due to the fact that my gauges worked when the key was on the on position. I changed the TTM to a 14 awg red wire with light green trace under the dash. This wire would allow the truck to continue to run until cool but the glow plug relay light and the abs lights on the dash would come on and the newly installed gauges that are still connected to the red wire with black trace would go off/. Is this normal or do I still have the wrong wire. My truck is a 2002.
Thread
Thread Starter
Forum
Replies
Last Post
ZombiePopper
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
13
Oct 3, 2014 03:15 AM
Kramer73
1999 - 2003 7.3L Power Stroke Diesel
3
Apr 25, 2013 07:57 AM
fishindave11
1978 - 1996 Big Bronco
18
Apr 17, 2012 04:38 PM
