bleeding the zf 5 speed
Thread Starter
|
Senior User
Joined: Dec 2003
Posts: 268
Likes: 0
From: NY
bleeding the zf 5 speed
i just did the zf swap in my bronco and no matter how many times i press and depress teh clutch pedal, it still wont bleed corectly. any idea on how to bleed this thing?
Posting Guru
Joined: Apr 2002
Posts: 1,187
Likes: 0
From: CT
I'm in the same boat, hydro clutches are a bear to bleed. One thing that i'm going to try as soon as i get some time.
Gravity bleed it for a while, make to to keep the fluid in the master or more air will be introduced into the system.
Remove the cap and pump the pedal slowly 50 times replace cap and check for pressure. repeat in needed
Gravity bleed it for a while, make to to keep the fluid in the master or more air will be introduced into the system.
Remove the cap and pump the pedal slowly 50 times replace cap and check for pressure. repeat in needed
