Hedman Headers......
Thread Starter
|
Freshman User
Joined: Apr 2004
Posts: 28
Likes: 0
Hedman Headers......
I am building a 351W for an 1986 Bronco and am looking for a set of headers.
Anyway, for those of you who have used hedman headers in thier Bronco, was the part # 89270? I am just making sure that these will work, and if not can you give me the part # that you used?
Thanks,
Nick~
Anyway, for those of you who have used hedman headers in thier Bronco, was the part # 89270? I am just making sure that these will work, and if not can you give me the part # that you used?
Thanks,
Nick~
Senior User
Joined: Aug 2000
Posts: 473
Likes: 1
From: Richmond, CA
I have Hedmans, But I don't remember what the Part # is off the top of my head. I'll have to dig up my paper work.
If you already have the engine out of your rig, do your self a favor and put those headers on before you put engine back in. The Hedmans are a real pain in the **** to put in when the engine is in place. The last bolt on passenger side next to the firewall took me about an hour to tighten. Aslo, a set of craw foot wrenches will help greatly.
If you already have the engine out of your rig, do your self a favor and put those headers on before you put engine back in. The Hedmans are a real pain in the **** to put in when the engine is in place. The last bolt on passenger side next to the firewall took me about an hour to tighten. Aslo, a set of craw foot wrenches will help greatly.
Thread Starter
|
Freshman User
Joined: Apr 2004
Posts: 28
Likes: 0
Originally Posted by tite4x4
I have Hedmans, But I don't remember what the Part # is off the top of my head. I'll have to dig up my paper work.
If you already have the engine out of your rig, do your self a favor and put those headers on before you put engine back in. The Hedmans are a real pain in the **** to put in when the engine is in place. The last bolt on passenger side next to the firewall took me about an hour to tighten. Aslo, a set of craw foot wrenches will help greatly.
If you already have the engine out of your rig, do your self a favor and put those headers on before you put engine back in. The Hedmans are a real pain in the **** to put in when the engine is in place. The last bolt on passenger side next to the firewall took me about an hour to tighten. Aslo, a set of craw foot wrenches will help greatly.
Thanks,
Nick~
Senior User
Joined: Aug 2000
Posts: 473
Likes: 1
From: Richmond, CA
Originally Posted by nickmyron
Do you think that you could find that part # for me? It would really help me out ALOT! And i would very much appreciate it!
Thanks,
Nick~
Thanks,
Nick~
I just checked Hedman web site = http://www.hedman.com/ and the numbers that you posted earlier seems to match what they claim for your application.
Last edited by tite4x4; Apr 25, 2004 at 10:13 AM. Reason: adding to message
