just got an edge programer
Thread Starter
|
Freshman User
Joined: Oct 2002
Posts: 43
Likes: 0
From: Boerne USA
just got an edge programer
i have a new down pipe, straight pipe, pyro, and boost gauge. just got a new tuner and tuned it to 100hp. was wondering if 11.2 sec for 0-60 was good or not. also what should i be boosting?
Senior User
Joined: Sep 2003
Posts: 369
Likes: 0
From: Brighton, Co
My truck on the same setting gets about the same time 0-60, boost is around 16 psi. LOTS of smoke!!! Try retuning to stock and running the 0-60 and 1/4 mile with the stock programming then go back to extreme and do the same thing. The results speak for themselves. I love it!! Gobs of power right off the line!!
Two nights ago, a little Toyota tuner car with the fart can exhaust tried to outrun me. About 100 yards off the line the two lanes merged into one and I KILLED him!! Best part of it was he had his drivers window down and I know he ate a ot of smoke as I flew past him!! Had a little buddy in the car next to him to. He was hating me!!
I LOVE MY TRUCK!!
Two nights ago, a little Toyota tuner car with the fart can exhaust tried to outrun me. About 100 yards off the line the two lanes merged into one and I KILLED him!! Best part of it was he had his drivers window down and I know he ate a ot of smoke as I flew past him!! Had a little buddy in the car next to him to. He was hating me!!
I LOVE MY TRUCK!!
Postmaster
Joined: Jan 2004
Posts: 4,758
Likes: 7
From: colorado
Originally Posted by bud465
i have a new down pipe, straight pipe, pyro, and boost gauge. just got a new tuner and tuned it to 100hp. was wondering if 11.2 sec for 0-60 was good or not. also what should i be boosting?
16 pounds of boost does not sound right. when i have my chip (not an edge) in the high output mode it will run about 30psi
Last edited by wlihntr; Apr 15, 2004 at 09:11 AM.
Senior User
Joined: Nov 2003
Posts: 331
Likes: 0
From: Abilene TX
i have to agree with Jmorton, I have 4"turbo back exhaust, diablo predator 100hp and wicked wheel. Before the wicked wheel I was in the low 8's 0-60. I havn't tried it again since the wicked wheel install. Further more, i can get above 30 lbs of boost at open throttle. I wouldn't say that there is something wrong with your truck or programmer, but I would think it would do better than 11 sec 0-60. I think it is supposed to do close to that stock??
By the way Jmorton, I think truck trend is full of BS cause I've anhialated stock 6.0 PSD's and according to Truck Trend the stocker 6.0's should be faster???
By the way Jmorton, I think truck trend is full of BS cause I've anhialated stock 6.0 PSD's and according to Truck Trend the stocker 6.0's should be faster???
Postmaster
Joined: Jan 2004
Posts: 4,758
Likes: 7
From: colorado
Originally Posted by bigdieseldav
i have to agree with Jmorton, I have 4"turbo back exhaust, diablo predator 100hp and wicked wheel. Before the wicked wheel I was in the low 8's 0-60. I havn't tried it again since the wicked wheel install. Further more, i can get above 30 lbs of boost at open throttle. I wouldn't say that there is something wrong with your truck or programmer, but I would think it would do better than 11 sec 0-60. I think it is supposed to do close to that stock??
By the way Jmorton, I think truck trend is full of BS cause I've anhialated stock 6.0 PSD's and according to Truck Trend the stocker 6.0's should be faster???
By the way Jmorton, I think truck trend is full of BS cause I've anhialated stock 6.0 PSD's and according to Truck Trend the stocker 6.0's should be faster???
Senior User
Joined: Sep 2003
Posts: 369
Likes: 0
From: Brighton, Co
I know I can kill a 6.0 right now, and that's with stock exhaust!! The Evolution is awesome on the 100 hp setting. It's not scary fast but it is realy fun!! I've only had it on for a week and have had my foot in it a lot but fuel mileage is within a few miles of normal wven with stomping on it a lot. I love it!! If it does as advertised, I should be at 325 hp at the flywheel, not bad....
