Rebuilt engine for 89
Thread Starter
|
New User
Joined: Jan 2004
Posts: 2
Likes: 0
From: Lake Charles
Rebuilt engine for 89
I am going to get a bronco, but it needs a new engine. It currently has 302 in it, but I was wondering if I could fit this 351 in it:
http://www.discount-auto-parts-store...51WHOLB-1.html
In addition to this, would I need to buy any more things for it took hook up and how much would it cost me to pay someone to change these out?
http://www.discount-auto-parts-store...51WHOLB-1.html
In addition to this, would I need to buy any more things for it took hook up and how much would it cost me to pay someone to change these out?
Senior User
Joined: Mar 2004
Posts: 497
Likes: 0
From: END OF THE OREGON TRAIL
Look For A Truck In The Wrecking Yard And Compare Differences And Get Parts.
I Think The Computer Is Different, Firing Order, And Engine Block Deck Height Is Taller On 351. Exhaust Might Not Work Heads Are Going To Be Higher Up In Engine Compartment.
I Don't Think It Is A Hard Swap But Their Are A Lot Of Little Differences.
Good Luck
:-x22 :-x22
I Think The Computer Is Different, Firing Order, And Engine Block Deck Height Is Taller On 351. Exhaust Might Not Work Heads Are Going To Be Higher Up In Engine Compartment.
I Don't Think It Is A Hard Swap But Their Are A Lot Of Little Differences.
Good Luck
:-x22 :-x22
