Predator reads bad codes
Thread Starter
|
Laughing Gas
Joined: Feb 2004
Posts: 974
Likes: 5
From: FLA
Predator reads bad codes
I finally finished my gauge install over the weekend so I thought I would at least hook up my predator to read the codes. I haven't installed any predator stuff yet as I wanted to get some "factory" readings first. Anyway I read the codes and got P0266 and P0603. I can't find a description for P0266. P0603 says "Powertrain Control Module Keep Alive Memory (KAM) Error". Well I assume the PO603 might have happened when they flashed my truck for the Oct flash. Maybe they disconnected the battery before flashing?
Can anyone help me with the P0266 code? BTW, after reading the codes I used the pred to clear them to see if they come back. Had honey do's over the weekend so I didn't drive. Thanks
Can anyone help me with the P0266 code? BTW, after reading the codes I used the pred to clear them to see if they come back. Had honey do's over the weekend so I didn't drive. Thanks
Thread Starter
|
Laughing Gas
Joined: Feb 2004
Posts: 974
Likes: 5
From: FLA
Originally Posted by taztruck
P0266 — PCED Cylinder 2 contribution/balance fault Power cylinder, valve train or injector problem, circuit
