Sway Bars
Thread Starter
|
Senior User
Joined: Dec 2003
Posts: 119
Likes: 0
From: Denver Colorado
Sway Bars
I am looking for end link brackets for a front sway bar and some urethane bushings for the front and rear sway bars. Bars are off of a 77 going under a 68.
Any advice?
Any advice?
Senior User
Joined: Mar 2004
Posts: 118
Likes: 0
You might check with National Parts Depot, LMC Truck, or Performance Suspension Technologies, they all have a assortment of front sway bars, bushings and brackets for the 67-72 F-100. And they have free catalogs too!! Good luck! 
Elder User
Joined: May 2002
Posts: 799
Likes: 0
I got my links from JC Whitney, but I think I'll get the next size bigger. There are comments and opics on my FTE website. For brackets, I made one of my own. The junk-yard parts were missing one of the ones that bolts to the axle. I think I used 1/2 x 2-1/2 bar stock (or something like that). More measurements and pics are in my FTE site.
Thread Starter
|
Senior User
Joined: Dec 2003
Posts: 119
Likes: 0
From: Denver Colorado
Sway Bars
Great pic's! That is an entirely different setup that my donor F-250. That one was a 77 and had the end link brackets attached beneath the coil springs. I couldn't get them off to save my life so I am looking for some new ones. I like the end link set up that you have, simple and easy to install.
Elder User
Joined: May 2002
Posts: 799
Likes: 0
Originally Posted by JDenver
Great pic's! That is an entirely different setup that my donor F-250. That one was a 77 and had the end link brackets attached beneath the coil springs. I couldn't get them off to save my life so I am looking for some new ones. I like the end link set up that you have, simple and easy to install.
