FAQ update
Thread Starter
|
Sit. Stay.
Joined: Oct 2001
Posts: 18,308
Likes: 20
From: Washington State
FAQ update
I added the part numbers and changing procedure for the PSD's Cam Position Sensor. See the engine and tranny section.
Thanks to johndiesel for the write up.
Got something to add? Send it too me. The new ClubFTE WYSIWYG editor makes it a breeze.
It must be complete. Don't send me suggestions that I have to spend hours writing and researching, please.
Done that already... 
Thanks to johndiesel for the write up.
Got something to add? Send it too me. The new ClubFTE WYSIWYG editor makes it a breeze.
It must be complete. Don't send me suggestions that I have to spend hours writing and researching, please.
Done that already...
Post Fiend
Joined: Jun 2003
Posts: 5,643
Likes: 8
From: NE Texas
Thanks, Monsta. It seems like at some point Ford will log on and start using some of FTE's troubleshooting techniques in their maintenance program...if they haven't already!
Again, many thanks for all the hard work and dedication.
Again, many thanks for all the hard work and dedication.
