2nd trailer light
Thread Starter
|
Junior User
Joined: Feb 2001
Posts: 96
Likes: 0
From: Elko, NV
2nd trailer light
I have a 99 F350 PSD that has a trailer connector on the bumper. I am putting a 25,000lb goose neck hitch in the bed and want to wire another plug in the bed so I dont have to hang the trailer wire over the tailgate and rip it apart every time I turn sharp. Does anyone know where I can tie into the wiring without actually splicing into the existing wires(like a junction box for the trailer curcuit). Any help would be greatly apreceated.
Thanks,
Ben
Thanks,
Ben
Elder User
Joined: Dec 2000
Posts: 654
Likes: 0
From: Michigan
2nd trailer light
dover:
I have seen places that make an "extension cord" if you will
runs from the plug below the bumper ( just plugs in )
up into the bed and is mounted in a convenient location so
you can plug in there. It does work.
Jim.
2000 F-250 XLT SUPERCAB 7.3 PSD 4X4 AUTO, LIGHTED VISOR, ROLL TOP COVER, BLACK AND BEAUTIFUL. I JUST LOVE A FORD TRUCK.
I have seen places that make an "extension cord" if you will
runs from the plug below the bumper ( just plugs in )
up into the bed and is mounted in a convenient location so
you can plug in there. It does work.
Jim.
2000 F-250 XLT SUPERCAB 7.3 PSD 4X4 AUTO, LIGHTED VISOR, ROLL TOP COVER, BLACK AND BEAUTIFUL. I JUST LOVE A FORD TRUCK.
Thread Starter
|
Junior User
Joined: Feb 2001
Posts: 96
Likes: 0
From: Elko, NV
2nd trailer light
Jim,
Thanks for the thought but I was looking at the instructions in my trailer tow kit and there is a seven wire harness hiden under my bumper, hooked into the four wire harness already in use.
Thanks for the thought but I was looking at the instructions in my trailer tow kit and there is a seven wire harness hiden under my bumper, hooked into the four wire harness already in use.
