locking up a 3/4 ton
Thread Starter
|
New User
Joined: Mar 2004
Posts: 3
Likes: 0
locking up a 3/4 ton
What do i weld to lock up the front and rear ends of a 1979 f-250 4x4. It has 4 inches of lift and 40's so i want it to be locked at all times cuz it is not a daily driver just a play truck. Thanks Stroke
Postmaster
Joined: Feb 2003
Posts: 4,043
Likes: 4
You do realize that if you lock the front diff, it will make it difficult to turn. Even in loose dirt. That being said I'm not sure what to weld up in the diff to lock it. I think it's the spider gears but someone here will know.
Postmaster
Joined: Apr 2000
Posts: 2,838
Likes: 6
From: SD
Welcome to FTE...
There is a tech article with step by step instructions to weld a diff. Go to the "tech articles" link in the right hand column and look through the list of articles. I'm sure you'll find some other ones to look at too...
Marty
There is a tech article with step by step instructions to weld a diff. Go to the "tech articles" link in the right hand column and look through the list of articles. I'm sure you'll find some other ones to look at too...
Marty
