Converting tag along?
Thread Starter
|
Freshman User
Joined: Nov 2003
Posts: 34
Likes: 0
Converting tag along?
I just pirchased a a tri-axle tag along with a 21k GVW. Would love to convert it to a GooseNeck. Anyone know of a place preferably in the New England area that could do the conversion?
TIA
TIA
Posting Guru
Joined: Nov 2000
Posts: 1,005
Likes: 1
From: Cincinnati, Ohio
You could look in the yellow pages or online to find a utility / flatbed trailer manufacturer in your area, there are a few around Cincinnati (within a couple hundred miles). I would trust someone who does it a lot to have the correct components and the expertise to do it right. You are looking at a trailer that will have a pretty high gross weight rating so it will need to be done by someone with experience. I have read/heard of this being done before with good results but it has been a while and I do not remember where.
You cold go to www.traderonline.com, check in the equipment trader and look for someone near you who makes and sells trailers.
A few links I found just noodling around:
http://www.superiortrailer.com
http://www.pj-trailers.com
http://www.andersontrailers.com
http://www.bigtextrailers.com
Dave / Believer45
You cold go to www.traderonline.com, check in the equipment trader and look for someone near you who makes and sells trailers.
A few links I found just noodling around:
http://www.superiortrailer.com
http://www.pj-trailers.com
http://www.andersontrailers.com
http://www.bigtextrailers.com
Dave / Believer45
Thread
Thread Starter
Forum
Replies
Last Post
Diesel_Brad
1994.5 - 1997 7.3L Power Stroke Diesel
4
Nov 7, 2013 12:46 AM
fords8
General Chapter Discussion
6
Jun 3, 2004 05:21 AM
