motor mount question
Thread Starter
|
New User
Joined: Nov 2003
Posts: 10
Likes: 0
motor mount question
I need some help.. I have a 1968 ford f100.. I am wanting to put a 351W in it. I already have the 351 just uinsure of what motor mounts I need. What motor mounts do I need to make this conversion work? Where could I find them. Any help would be appreciated.
New User
Joined: Dec 2003
Posts: 4
Likes: 0
custom 68, as mk mentioned use the 302 motor mounts. I replaced the tired 390 in my 70 F100 with a 302 and the only change I had to make as far as mounts were concerned was to move the mount towers towards the cab to the next set of holes in the frame. (I did have to drill one hole to bolt them to the frame but the rest lined up perfectly!) I was even able to use the original driveshaft!
The 302 was out of a 68 Cougar so I just went to the parts store and bought mounts for that year/ motor. Good luck- good choice!
The 302 was out of a 68 Cougar so I just went to the parts store and bought mounts for that year/ motor. Good luck- good choice!
