Update on lift
#1
02-22-2004, 08:53 PM
Join Date: Feb 2004
Location: Duck, NC
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Update on lift
well i have finally got my truck back, and i must say its looking dang good. I put 6" suspension and 3" body lifts on and am sitting on 38x15.50 Dick Cepek Kevlar tires, i also have ladder bars with the Ford ovals on them. So far the only problems i have ran into was minor rubbing (which i somewhat fixed by cranking the torsion bars up) and the needle on the gear shifter is a little off (i found this out when i put it in what i thought was OD and turned out it was 2nd gear, kinda figured something was off when it didnt shift) besides that no problems. O and yes I am going to get some pics of it as soon as i get my exhaust ran.
#2
02-22-2004, 09:54 PM
Freshman User
Join Date: Feb 2004
Location: TEXAS/OKLAHOMA/LOUISIANA
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
#3
02-22-2004, 11:41 PM
New User
Join Date: Dec 2003
Location: So. Cal
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
#4
02-23-2004, 05:00 PM
Join Date: Feb 2004
Location: Duck, NC
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
I got a killer deal, got the tires, rims, lift, ladder bars and a whole front end off a 97 F-150 for $2300, with labor, gears, exhaust, and a few odds and ends it was about $5000, the lift is a superlift, so really its a 5" but crank up the torsion bars, and u got up to about 7". As far as the ladder bars go, i think they are fabtechs. try www.4wheelparts.com, they should have something. pics are coming, just have to get a hold of a digital camera...