8.8" to Full-Floating, Possible?
Thread Starter
|
Senior User
Joined: Nov 2001
Posts: 161
Likes: 0
8.8" to Full-Floating, Possible?
I have a 1990 F-150 with 300 and a E4OD, it's just a 2 wheel drive. I tow a lot with it and would like to know if there is someone that makes a kit to convert it to a full-floating rear. And about how much should it cost and could I install it myself? What is a full-floater compared to a regular axle, or what I have now.
Thanks for all help.
Thanks for all help.
Postmaster
Joined: Feb 2000
Posts: 2,759
Likes: 2
From: Auburn,Al
i ssecond redrocket....the sterling will bolt right in, you will just need to shorten your d-shaft
the 8.8 is known for a weak carrier/cross pin, and ive seen a few where the pumkin spun on the housing
the 8.8 is known for a weak carrier/cross pin, and ive seen a few where the pumkin spun on the housing
