power steering conversion
Thread Starter
|
Cargo Master
Joined: Sep 2003
Posts: 2,110
Likes: 32
From: southwest pa
power steering conversion
i have a 1975 highboy with the stock ram assist crap steering that i am hoping to swap out someime in the near future. i can deal with the fluid drips, but the joint that connects the pitman arm to the drag link is worn out and gives me about 1/8 turn play in the wheel where its totally unresponsive. i have a 87 f250 in my area that im going to look at and i was wandering if i could use the steering setup from the 87 on my 75. as far as i know i can only use the 78-79 box, but if i can use the 87 box or whatever, it woud be cool too. ny help would be appreciated,
thanks
thanks
Cross-Country
Joined: Dec 2003
Posts: 68
Likes: 0
From: Que. Canada
