Do I have a Problem? Carb, That Is!!!
Thread Starter
|
Senior User
Joined: Nov 2003
Posts: 101
Likes: 0
From: Central Ohio
Do I have a Problem? Carb, That Is!!!
While adjusting the 2100 carb on my '72 302, I noticed, while at 600 rpm, that I could screw the idle adjustment screws all the way in without any noticeable change. So I turned the fast idle adjustment out to the point that the motor was approaching stall speed. I then screwed the idle screws out one full turn. Again no change in idle.
Is there a problem with the carb?
When I got the truck the carb and top of the engine were soaked with gas.
I probably need a new carb.
Is there a problem with the carb?
When I got the truck the carb and top of the engine were soaked with gas.
I probably need a new carb.
