Maf
Thread Starter
|
Laughing Gas
Joined: Oct 2003
Posts: 967
Likes: 0
From: DC
Maf
I'm planning on cleaning the MAF on my '97 F-150 4.6. I found some good info on the board about MAF cleaning. Most of the MAF cleaning posts I read describe a MAF mount with a box and 2 security star screws. If I'm looking at the right thing on my truck its just pressed into the center (accordian shaped) duct and the wire is "U" shaped vice the 2 wires I've seen described elsehere. Am I looking at the right thing?
Moderator
Joined: Dec 2001
Posts: 22,436
Likes: 17
From: Louisville,Ky.
You can see it by looking into the air filter housing that is going to the engine. You have to open the air filter housing and if you look into the left size of the housing, you can pop out the center section and the MAF comes out with it.
Jimmy
Jimmy
