Coil Question Please Help
Thread Starter
|
Senior User
Joined: May 2003
Posts: 123
Likes: 0
From: Philadelphia
Coil Question Please Help
Ok, this is fairly easy and dumb question, so forgive my newbieness. I got a new coil and was looking to replace it today. Got everything unplugged but got stuck on the screws that are holding the coil in. I don't have the right size tool to remove them. The smallest box wrench I got is a 7mm and it is to big. it was the smallest one I could find at the hardware store. I also grabbed a 1/4 and 3/16 six point screwdriver thing. The 3/16 is to small, but the 1/4 seems a hair too big. Has anyone done this and what tool did you use?
Senior User
Joined: May 2003
Posts: 337
Likes: 0
From: Ohia
I replaced mine, i dont remember what size my socket was, but I used a little kit thing i bought at ACE hardwear its only like 20 dollars, and you cant beat it for removing interior parts, and random odd jobs like that
