EGR manifold solution needed please
Thread Starter
|
Freshman User
Joined: Sep 2003
Posts: 32
Likes: 0
From: Portland, Oregon
EGR manifold solution needed please
I just picked up a '79 bronco. The manifold is a Edelbrock Performer Dual plane with the EGR port. It doesn't have an EGR valve though so I need a good solution for covering this so I dont have to spend the cash for a new manifold.
Thanks for any help
Thanks for any help
Elder User
Joined: Dec 2003
Posts: 655
Likes: 0
From: Miami
If you own a hack-saw and a drill and drill bits, build one! Find a piece of 1/4" aluminum plate 4" X 4" , at an auto parts store, pick-up some gasket making material. Using a piece of cardboard make a template and transfer it to the aluminum, cut-it and drill the mounting holes, make a gasket, bolt it up!
She Ain't Revved Ti'll The Rod's Are Thrown
Al
She Ain't Revved Ti'll The Rod's Are Thrown
Al
