wheel studs HELP
Thread Starter
|
New User
Joined: Dec 2003
Posts: 1
Likes: 0
wheel studs HELP
I just bought a 99 f-150 xlt 2wd with 4w disc. The truck has Centerline Scorpion rims and the front studs poke through fine but the rear studs barely catch enough of the factory lugnuts. I have talked to Centerline and they say that the rims and factory lugnuts are compatible and they recommend using only the factory style lugnut. I've tried to find longer wheel studs for the back but have been told there are only 2 sizes, one for the front and one for the rear, the rear being the shorter of the two. Is it possible to use a set of front studs on the back? Any help would be greatly appreciated.
Moderator
Joined: Dec 2001
Posts: 22,436
Likes: 17
From: Louisville,Ky.
Welcome to the forum, nugie. 
Sorry, I do not have an answer to your question, but hang tight. Somebody here may have run into this before.
My only question is, why are their wheels so thick?
Jimmy
Sorry, I do not have an answer to your question, but hang tight. Somebody here may have run into this before.
My only question is, why are their wheels so thick?
Jimmy
