Have you seen this:
Thread Starter
|
New User
Joined: Jul 2003
Posts: 3
Likes: 0
Posting Guru
Joined: Nov 2000
Posts: 1,005
Likes: 1
From: Cincinnati, Ohio
A little info I got from another site.
Maddog's truck with power stroke got into the twelves in the quarter, dyno at 602 hp and 1340 lb-ft of torque at the rear wheels. About as far as a Stroke will go and be reasonable.
Currently 12 valve Cummins with 800+ HP and 1400+ lb-ft of torque, 20 lbs boost at launch somewhere around 100 lbs of boost by the end of the run, all through a BTS auto trans with a heavier input shaft. This is a daily driver as well.
Amazing, almost scary, truck.
Dave / Believer45
Maddog's truck with power stroke got into the twelves in the quarter, dyno at 602 hp and 1340 lb-ft of torque at the rear wheels. About as far as a Stroke will go and be reasonable.
Currently 12 valve Cummins with 800+ HP and 1400+ lb-ft of torque, 20 lbs boost at launch somewhere around 100 lbs of boost by the end of the run, all through a BTS auto trans with a heavier input shaft. This is a daily driver as well.
Amazing, almost scary, truck.
Dave / Believer45
Postmaster
Joined: Feb 2002
Posts: 2,773
Likes: 0
From: Bonney Lake, WA
Anything is possible, if you're willing to spend enough money. The old saying is: "There's no substitute for cubic inches." With modern technology, it ought to be: "There's no substitute for cubic dollars." 
Thread
Thread Starter
Forum
Replies
Last Post
